Metal-Processing Horizontal Heavy Duty Large Lathe Cw6180 Manual Conventional Metal Turning Lathe

• After-sales Service: 24 Hours Online
• Warranty: One Year
• Type: Horizontal Lathe
• Model NO.: CW6180
• Processing Accessory: Metel
• Guide Rail: Other
• Tool Holder: 4 Station Manual Tool Post
• Power Source: Electric
• Controlling Mode: System
• Automatic Grade: Manual
• Setting Mode: Other
• Precision: High Precision
• Condition: New
• Product Name: Cw6180 Manual Lathe
• Model: Cw6180
• Max. Diameter Swing Over Bed: 800mm
• Max. Diameter Swing Over Cross Slide: 480/520/550mm
• Distance Between Centers: 1500 mm
• Maximum Machining Length: 1250 mm
• Width of Bed Way: 550/600/650 mm
• Max. Load Capacity: 2/2.5 /3t
• Spindle Bore: 104/105 mm
• Spindle Nose: C11
• Spindle Taper Hole: (Metric):120/1:20
• Spindle Motor: 11 /15kw
• Spindle Speed Steps: Three Gears Frequency Conversion
• Dimensions: 3700X1750X1500
• Weight: 5000/5700kg
• Transport Package: Wooden Case
• Trademark: BST
• Origin: China
• HS Code: 8458110090
• Package Size: 370.00cm * 175.00cm * 150.00cm
• Package Gross Weight: 5700.000kg

Product Description

Product Description

UNIVERSAL ENGINE LATHE APPLICATION
This series lathe is universal metal machining equipment, mainly used for turning the internal and external cylindrical surface,conical surface and other rotating surfaces, as well as turning internal and external pipe threads such as metric , inch,module and DP threads etc, Meanwhile this series lathe is also used for drilling and grooving with metal material workpieces such as cast iron, steel and non-ferrous metals.
Integral machine bed adopts high strength iron to realize high rigidity and precision;
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;
Headstock gears are hardened and ground to achieve high precision and low noise.
CW6180 CONVENTIONAL LATHE MACHINE

SPECIFICATION OF CONVENTIONAL LATHE MACHINE
ITEMS		UNIT	CW6180
Capacity	Max. diameter swing over bed	mm	Φ800	Φ800	Φ800
	Max. diameter swing over cross slide	mm	Φ550	Φ520	Φ480
	Distance between centers	mm	1500	1500	1500
	Maximum machining length	mm	1250	1250	1200
	Width of bed way	mm	550	650	600/650
	Max. load capacity	T	2	3	2.5/3
Spindle	Spindle bore	mm	Φ105	Φ105	Φ104
	Spindle nose		C11	C11	C11
	Spindle taper hole		(Metric):120/1:20	(Metric):120/1:20	(Metric):120/1:20
	Spindle motor	KW	11	11	15
	Spindle speed steps	-	Two gears frequency conversion		Three gears frequency conversion
	Spindle speed range	rpm	15-100/100-350 VF2 steps 32/0.095-1.4	15-100/100-350 VF2 steps 32/0.095-1.4	(L):25-100 (M):80-260 (H):240-700
Turret	Max.traverse of the turret	mm	200	200	205
	Turret type	-	Manual 4 position	Manual 4 position	Manual 4 position
	Tool shank size	mm	32×32	32×32	32×32/40X40
Feed	Traverse of cross slide	mm	420	400	420
	Z axis feed grade /range	mm	32/0.095-1.4	32/0.095-1.4	32/0.095-1.4
	X axis feed grade/range	mm	32/0.042-0.7	32/0.042-0.7	32/0.042-0.7
	Carriage raid traverse speed	Mm/min	3740	3740	3740
	Cross slid raid traverse speed	Mm/min	1870	1870	1870
	Metric thead grade/range	mm	22/1-15mm	22/1-15mm	22/1-15mm
	Inch thread grade/range	T.P.I.	26/14-1	26/14-1	26/14-1
Tailstock	Tailstock quill diameter	mm	Φ100	Φ100	Φ100
	Tailstock quill taper	-	Morse NO.5/6	Morse NO.6	Morse NO.6
	Tailstock quill travel	mm	250	250	250
Dimensions	Width x Height	mm	3600X1600×1500	3650X1700×1550	3700X1750×1500
Weight	Net weight	KG	4500	5500	5000/5700

Standard Configuration

- 3 jaws manual chuck (320mm );
-4 station manual tool post ;
-Manual tailstock ;
-Whole casting bed .